Our peel and stick scallop wallpaper is here!
Our Scallops are provided individual pieces with a 1cm overlap for seamless installation.
Each scallop is 50cm width x 130 height OR 30cm width x 60cm height.
How to order... First choose your desired height. Then measure your wall and work out how many scallops you need. We don’t provide half pieces, but it’s super easy to trim on installation. E.g. if your wall is 360cm in width, you will need x8 pieces, so use the drop down menu to select 8 scallops
Do one wall or all four. Delivered in vertical panels for DIY installation.
Simply peel, stick and smooth to give your space an awesome punch of colour. No painting required!
- No moving the furniture out of the room
- No sanding or preparation
- No painting: no multiple coats, no waiting around for your paint to dry, no uneven lines
- No money wasted on paint, paint brushes, rollers, drop sheets, tape or even a professional painter
- No repainting when you want a change
- No permission needed from your landlord: simply peel, stick and smooth, and remove it when you move out
Install a complete room... yes, that’s 4 walls in around 2 hours.
Available in 20 colourways. You can mix and match to create a rainbow scalloped wall, how fun!
The colours include a slight texture to add character.
Purchase a sample here:
Prior to installation place a feint line in grey lead or chalk at the correct height. Place the line a few centimetres lower than the total height of the wallpaper to allow for wall warping (trim the excess from the bottom and right hand side at the end). Make sure to use a level. To install, position the top of the scallop on the line, then peel, stick and smooth. Keep repeating until you've installed the whole wall. Each scallop has a 1cm overlap for easy installation. The first scallop will also have this overlap on the left hand side - you will need to trim it off at the end.
The colours seen here may appear slightly different when printed, as the website photos are a representation only. Always order a sample before ordering. Allow for variation in colour between each scallop panel, this is due to ink and fabric differences. Colour difference can become obvious once the panels have been installed. We will not replace panels in the event of colour variation, as it is impossible to print each panel exactly the same.
Past customers please note: our scallops previously came in larger panels (100cm width x 130cm height), if you require the installation instructions for these, please get in touch via email. The main difference with our original scallops was that they did not have a 1cm overlap, they were butt joined. Also note, our new single scallops will not be an exact colour match to our original double scallops.