Hidden Forest

PRODUCT DETAILS

HOW TO USE OUR PRODUCT

Not only can you completely transform a wall, you can also “upcycle” or “hack” a piece of furniture or play kitchen or make over a dollhouse… you are only limited by your imagination.  "We use the term 'hack' to describe modifying a piece of furniture to give it new life. We love a good hack!".

Do you need some inspiration? Check out what our clever and talented customers and stylists have used our wallpaper to create.

Your project using our ‘peel and stick’ wallpaper:

Here are 5 easy DIY steps to creating your own unique masterpiece using our wallpaper…

1/ Get creative and come up with your very own “hack”

2/ Choose your wallpaper design.

3/ Measure your project, select the wallpaper size you require, then and place your order.

4/ Once you receive your wallpaper, simply trim your wallpaper to size using a sharp Stanley knife and straight edge ruler

5/ Peel off the backing sheet and stick!

Tips:

Ikea Duktig play kitchen hack: You can either peel and stick your removable wallpaper to the wall behind the play kitchen, or alternatively, you can add a backing using plywood.  Give it a paint, apply the wallpaper and attach it to the back of the kitchen.

Table top

If you wish to transform a vanity/ desk/ table top, we can help you with this too!  Create your own bespoke pieces by updating your existing furniture with our table-top vinyl covers. Due to the laminate finish, you’ll even be able to lightly clean the table-tops with water or mild solvent, so any messes made by tiny hands can be gently wiped away.  This product is made from a self-adhesive vinyl, covered with a satin laminate (this product is not made from our peel and stick wallpaper product).  Mild solvents including Windex or Methylated spirits can be used to clean the product without damaging the print/image.  We have 2 price points available: 30cm x 30cm (and under) OR 60x60cm (and under).  Check out how our clever customers and stylists have transformed their Kmart Wooden Vanity:

Here are 5 easy DIY steps to creating your vanity/ desk/ table top…

1/ Get creative, choose your bland, old or outdated piece of furniture to make over. 

2/ Choose your wallpaper design.

3/ Measure your project, and then purchase the table top size you require (we have two sizes available).

4/ Add your measurements to the notes section on check out.  *Please note - this product does not come with bleeds; it will be trimmed to the size provided.

5/ Apply your table top to a flat surface.  It needs to be applied before fitting obstacles, such as handles etc.  

Tips:

Kmart Wooden Vanity: Please bear in mind that the Kmart vanity top has curved corners, so you will need to trim those yourself. To do this, other customers have simply placed the table top face down on the backside of the vinyl, traced around it and trimmed it, and just like that, it fits perfectly.  The corners can easily be trimmed post application to the surface as well, by carefully trimming using a sharp knife.

Can’t find what you need for your project? We also offer custom sizes, please get in touch to discuss a quote for a wallpaper that's perfectly sized for you project.

IMPORTANT INSTRUCTIONS

More product information can be found on our Instagram stories under “FAQs” and “installs”

• This product is not recommended for application over paints containing Teflon or "wash and wear” paints, always check with the paint manufacturer before purchasing this product. Teflon and “wash and wear” paints act as a repellent to the adhesive.
• Do not apply this product to freshly painted walls. Allow approximately 4 weeks for the paint to completely cure.
• This product is not recommended for application on textured walls.

We would always suggest always trialling an A3 sample on your wall for a week or two if you are concerned in any way about the surface to which you are applying the wallpaper to. 

We would suggest you prime your wall prior to application if:

• you are unsure if your paint contains Teflon or if you are unsure if your paint is a “wash and wear” paint*
• you are unsure about the quality of the wall preparation or existing paint job*.

*Renters should especially note these points, particularly given that they may not have prepared and painted the walls themselves.

If your wall has been painted with a paint that contains Teflon or a “wash and wear” paint, this product can be applied prior to application to assist adhesion: Self-adhesive prep coat by Viponds Paint.  Apply two coats with 4mm nap roller. Allow drying time between coats as per directions provided by Viponds. http://www.viponds.com.au/digital-print-prep-products

If you do not feel confident installing the wallpaper, please utilise the services of a professional wallpaper installer. In Melbourne, we’d suggest: https://paperscissorsglue.com.au/wallpaper-installation/

We are unable to replace wallpaper that has been incorrectly installed.

Failure to follow our recommendations can lead to:

• your wallpaper not sticking correctly or coming off your wall
• possible damage to your walls when removing your wallpaper.

We cannot be held responsible for any damage to walls, due to the variation in paint quality and wall preparation.

Care: In the event you would like to clean your wallpaper, wipe over only with a DRY cloth. Solvents will damage the print.

Safety: Our products and packaging are not a toy.  Our products should be installed by adults.  Keep out of reach of children. Supervise children when they are playing with toys that are “hacked” with our products.

TURN AROUND TIME & DELIVERY

We are a small family run company, and all our products are bespoke, and lovingly made to order (excluding 10cmx10cm samples), so please allow 4 weeks from the date of order to receive your item. Please contact us if you require your product in a shorter time frame, we may be able to accommodate your request.

10cmx10cm samples should arrive within 2 weeks of order, perhaps a little longer for international orders.

Please note that turnaround times may be longer than 4 weeks: after a sale, in the lead up to Christmas, and over the Christmas holiday period, and when we take a holiday/vacation.

Our wallpaper is wrapped in bubble wrap and shipped in a long rectangular box via https://www.packsend.com.au/ or  https://auspost.com.au/.  Our decals and smaller wallpapers are shipped in tubes via https://auspost.com.au/.

We require your full name, email address, telephone number and shipping address for all orders. No PO boxes for full sized wallpapers.

You will receive a shipping notification and tracking number via email once your order has been dispatched.  Tracking information is not available on 10cmx10cm samples, as they are shipped in a regular envelope.

We pay for insurance via Pack and Send on all full-sized wallpapers to protect our product and your purchase.

However, Minnie and Me Interiors cannot take responsibility for lost, stolen or damaged items. Please visit Australia Post for their delivery Terms & Conditions.

Domestic:

We offer free shipping on orders over $150 Australia wide. On orders under $150, we offer a $10 flat rate shipping Australia wide (excluding 10cmx10cm samples, which incur a $1 shipping fee).

Australia Post:

Standard post: Please allow up to 10 business days depending on location. For a more information please use the Australia Post delivery time calculator. or track your parcel using the link sent to you.

Express post: Next business day delivery* within the Express Post delivery network and fastest possible delivery for other areas.

International:

We will post internationally, though we charge freight storewide. If your country is not included on the shipping list, feel free to email us and we will arrange a shipping quote for you. Contact here.

As all countries have different duties and taxes, it is the responsibility of the purchaser to investigate if any duties are payable on overseas orders.  Customers from the European Union: you will incur taxes, you will be responsible for these charges, which are determined by your local customs authority.  Minnie and Me Interiors is not responsible for any further shipping, insurance or import charges once your item has left us in Melbourne, Australia.