For the little fairy dreamer... A lovingly drawn little fairy castle, inspired by your little one's favourite princesses. Adds a beautiful and whimsical touch to any room.
The original illustration was hand made with love by Bek Halliday.
Our fairy castle can be styled in multiple ways... use in a bedroom or playroom, place it alongside a bed or cot or even at the bed head, place it at ground level... the styling possibilities are endless.
The castle measures approximately 130cm high x 100cm width.
The matching flying friends decal set is not included and can be purchased separately.
Installation instructions: Also read our general installations instructions in our product information tab. You will need two people and a squeegee (provided by us) to install this product, as our fairy castle comes in one large piece. It will take approximately 15 minutes to install.
1/ When you are ready to stick the decal on, lay the decal flat on the floor and peel back the backing sheet at the base of the castle around 10cm, and crease/ fold back so that the peel sits flat (do not peel the entire backing sheet off yet).
2/ Start sticking the 10cm of exposed decal. Person 1 should smooth it onto the wall firmly with the squeegee provided, whilst Person 2 holds the sheet steady at the top.
3/ Once the first 10cm is stuck down, Person 2 should peel the backing up another 10cm, whilst Person 1 sticks it down with the squeegee. Person 2 should hold the continue to hold the sheet steady at the top. Continue this until the entire decal is applied. Take your time around the turrets and flags. You should not have any wrinkles or bubbles if you’ve followed the above instructions, but sometimes it happens and if it does, don’t worry, just rub them out gently with your squeegee.